Place the iFlawless Pro Max on a flat surface. Unfold the supporting legs on the device and plug in to a power source. Press the “POWER” button to start the device.
Adjust the length of your treatment. Press the “TIME” button. Default is set to 15 minutes. Pressing the “+” or “-” buttons increases or decreases 15 minutes. Max time is 60 minutes. Set by pressing the “TIME” button again.
Adjust the temperature of your treatment. Press the “TEMP” button. Default is set to 40. Pressing the “+” or “-” buttons increases or decreases by one unit. Max level is 60. Set by pressing the “TEMP” button again.
Apply the provided protective eye wear. Activate the “FLASH” function by pressing “FLASH”. A white light will go off every 10 seconds.
Start the treatment by pressing “CYCLE”. Immediately place the iFlawless Pro Max over the treated area. The color cycles will alternate automatically. Red-orange-yellow-violet-white-blue-cyan-green and back to red.
The iFlawless Pro Max will turn off automatically after the treatment. Unplug the adapter from the power source and separate from the device.
Download Instructions HERE